Sensor Setting
14
Measurement item
Display item
Factory default
setting
Item Unit
Main
display
Dissolved oxygen con-
centration
DO mg/L DO
Dissolved oxygen %
saturation
%Sat. % sat
Oxygen partial pressure O-Press kPa
2nd
display
- OFF - Temp.
Temperature Temp.
°
C
3rd
display
- OFF - OFF
Dissolved oxygen %
saturation
%Sat. % sat
Dissolved oxygen con-
centration
DO mg/L
Oxygen partial pressure O-Press kPa
Response time
Set a signal output response time.
A measurement value is calculated using moving average of the time period
set by the signal output response time.
For example, if the sensor measures values every 5 seconds and the signal
output response time is set to 50 seconds, which is 5 seconds
×
10 times,
the moving average of 10 times measurement is calculated and used as the
measurement value.
For operation, refer to the "Universal Transmitter SC-U1 Operation
Manual", "5.1 Sensor Setting" and "
◆
Response Time".
Setting range
Factory default
setting
Response
Time
5 to 600 seconds (by 5 seconds) 5 seconds
To Next Page
Loading...
