Maintenance
Setting
41
11
Maintenance Setting
Set the maintenance setting from SC-U1.
To perform maintenance, press
.
Measurement value hold
The latest measurement value is retained (held). This is used for sensor
maintenance and cleaning.
For operation, refer to the "Universal Transmitter SC-U1 Operation
Manual", "8 Maintenance Setting" and "
◆
Measurement value hold".
Hold timer
Set the time period to hold the measurement value.
Select an item from the following.
For operation, refer to the "Universal Transmitter SC-U1 Operation
Manual", "8 Maintenance Setting" and "
◆
Hold Timer".
Caution
Pressing automatically retains the measurement value.
Output item Setting range
Factory default
setting
HOLD Timer OFF
10 to 1440 minutes (by 10 minutes)
60 minutes
To Next Page
Loading...
