Optex DOS-20 - Cleaning Activation; Post-Cleaning Standby

Cleaning
48
Set the time period for cleaning.
Select an item from the following.
Set the standby time after cleaning.
Select an item from the following.
Cleaning activation
Post-cleaning standby
Item Setting range
Factory
default setting
Cleaning Activation 10 to 120 seconds (by 10 seconds) 30 seconds
Item Setting range
Factory
default setting
Post-cleaning Standby 10 to 180 seconds (by 10 seconds) 30 seconds
For operation, refer to the "Universal Transmitter SC-U1 Operation
Manual", "9 Cleaning" and "
◆
Cleaning Activation".
For operation, refer to the "Universal Transmitter SC-U1 Operation
Manual", "9 Cleaning" and "
◆
Post-cleaning Standby".