Maintenance
Setting
42
Set a maintenance timer for any cycle to notify the user when the set period
has elapsed.
This is used for notification of sensor maintenance, replacement of
consumables, and overhaul timing.
Check notifications by the relay output (
“Maintenance output setting” P.18
)
and the
dedicated cloud server (SC-U1 and GW connected).
For more information about checking notifications on the cloud server, refer
to the cloud server’s help.
Maintenance timer
For operation, refer to the "Universal Transmitter SC-U1 Operation
Manual", "8 Maintenance Setting" and "
◆
Maintenance Timer".
Output item Setting range
Factory default
setting
Maintenance
Timer
OFF
7 to 1095 days (by 1 day)
OFF
To Next Page
Loading...
