6
To clean the product, first
wipe away lightly with a clean
soft cloth damped by diluted
mild detergent solution and
then wipe off moisture with
a dry clean soft cloth. Do
not wipe the product with
solvent. It may cause failure.
Use the sensor with 12 to
36 VDC.
Otherwise it may cause fire
or electric shock.
2UJDQLF
6ROYHQW
7KLQQHU
HWF
12 to 36
VDC
Avoid strong physical
shock to the sensor or do
not drop it.
Do not touch the
measurement area. If it is
soiled, wipe it gently with a
clean and soft cloth, etc.
Do not damage the cable. Protect the cable with a spiral tube,
etc., When the sensor is pulled up or installed, protect the
cable with a spiral tube. Damage to the cable may cause
damage, fire or electric shock due to flooding. Water may
penetrate into the cable if it is damaged, resulting in
malfunctions, the outbreak of fire or electric shocks.
To Next Page
Loading...
