EasyManua.ls Logo

Optos P200T E Series - Warnings and Cautions; General Safety

Default Icon
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 1 - Warnings and cautions
1 Warnings and cautions
Your system is a medical device and must be operated within the safety parameters and instructions defined
in this User Guide.
If the device appears faulty or has non-functioning components, please contact your Optos representative,
see Contact us on page67.
If you have any questions regarding the correct use of your device, please contact your Optos representative
before attempting to operate the device.
Read the warnings and cautions before using your device.
1.1 General safety
WARNING
Guidance for use on patients with Epilepsy
The device uses flashes of light. Some patients with epilepsy may be sensitive to flashes
of light. Caution should be exercised for patients who have a history of reaction to camera
flashes or strobe lighting.
Equipment modifications
No modification of this equipment is allowed.
Positioning scan head on table
The scan head should be positioned in the middle of the table width. The front of the scan
head should be inline with the front of the table to allow the patient to get into the correct
alignment position.
The chin rest should slightly overhang the edge of the table.
Suitability of images
The suitability of using an image or print for viewing is determined by the clinician.
Fluorescence Imaging
Optos does not offer any guidance or advice on the injection of imaging dyes. It is
recommended that only authorized and appropriately qualified physicians or MD's can use
angiography modalities that require medical interventions.
Part Number: G110230/1ENG Page 11 of 72
Copyright 2019, Optos plc. All rights reserved. English

Table of Contents

Related product manuals