Optos P200T E Series - How Do I Restart the Image Server; What Should I Do if the PC Drive on the Image Server Is Full

Chapter 3 - How to...
3.4.9.5 How do I restart the image server?
Software problems are often temporary and can be resolved by restarting the PC.
Note
When restarting the image server:
l Ask scan head users to logout before shutting down the image server.
l Ask browser-based review client users to close Optos software.
1. Close all applications on the PC.
2.
Select Start > Shut down > Restart to restart your PC. Exit any programs if prompted.
3. Log on PC when prompted.
4. You can now login to the scan head and re-open any Optos applications on the other PCs.
3.4.9.6 What should I do if the PC drive on the image server is full?
Ask your System Administrator to:
l Empty the PC Recycle Bin
l Empty the Temporary Internet files
l Archive and clear archived studies to recover disk space
If the image server is full it is likely that the system needs to be archived and cleaned up using the archiving
tools.
If you still experience problems please contact your Optos representative, see Contact us on page67.
Page 58 of 72 Part Number: G110230/1ENG
English Copyright 2019, Optos plc. All rights reserved.