Optos P200T E Series - Manage the System; Managing User Details; How to Change the Language on the Scan Head

Chapter 3 - How to...
3.4 Manage the system
To ensure continuous and efficient operation, you should be familiar with additional features of the system.
Access to the administration functions is restricted to users with administrative privileges.
3.4.1 Managing user details
CAUTION
You are responsible for the security of user accounts and the maintenance of password
security.
You need a user account on the scan head and on OptosAdvance.
The ability to create a user account is restricted to System Administrators.
3.4.1.1 How to create user accounts for use on the scan head
1. Login to the scan head.
2.
Select To admin.
3.
Select Users.
4.
Select New user.
5. Enter the details for the new user and select if they will be an Administrator or Operator.
6. Return to the admin menu.
Note
User accounts can be made inactive.
3.4.1.2 How to create user accounts on the image server
1. Login to OptosAdvance.
2.
Select Settings.
3.
Select User Management > Accounts.
4.
Select Add.
5. Enter the details for the new user and select the privileges to be assigned to them.
6.
Select Save.
3.4.1.3 How to change users
To change users, logout of the software and allow the other user to login.
3.4.2 How to change the language on the scan head
You can change the language on the scan head by following these steps:
1. Log in to the scan head using the touch screen.
2.
Select To admin.
3.
Select Language.
4. Select a language from the list.
5.
Select X to set the language and close the page.
Part Number: G110230/1ENG Page 49 of 72
Copyright 2019, Optos plc. All rights reserved. English