Optos P200T E Series - Starting the Review Software; Reviewing Patient Images and Scans; Exiting the Review Software

Chapter 3 - How to...
FIGURE 15: Reviewing images workflow
3.3.1 Starting the review software
Access OptosAdvance using any standard web browser, see Review client properties on page61.
3.3.1.1 How to start the application
1. Use your web browser to go to the address provided by your System Administrator.
2.
Enter your username and password, then select Login.
3. You can now search for a patient.
You can also run the OptosAdvance software from the following:
1.
Double-click the desktop icon .
2. Log in using your username and password.
3.3.2 Reviewing patient images and scans
Captured images and scans are displayed using the OptosAdvance software. Refer to the help files for
details on using the applications.
1.
Double-click to run OptosAdvance.
2. Log in using your username and password.
3. Select the patient.
4. Select the image or scan to be reviewed.
5. Adjust the study layout and views as required.
6. Compare results across studies if required.
Note
Detailed instructions can be found in the application help files.
3.3.3 Exiting the review software
To leave OptosAdvance, select Logoff .
Page 48 of 72 Part Number: G110230/1ENG
English Copyright 2019, Optos plc. All rights reserved.