Optos P200TxE - Changing Users on the System; Changing Scan Head Language Settings; Changing Review Application Language; Storing and Archiving Images

Chapter 5 - Manage the system
6.1.3 How to change users
To change users, logout of the software and allow the other user to login.
6.2 How to change the language on the scan head
You can change the language on the scan head by following these steps:
1. Log in to the scan head using the touch screen.
2.
Select To admin.
3.
Select Language.
4. Select a language from the list.
5.
Select X to set the language and close the page.
6.3 How to change the language displayed in the review
application
All users can change the language displayed in OptosAdvance.
1. Login to the system.
2.
Select Settings.
3.
Select Preferences > User Preferences.
4.
Select the Preferred Language.
5.
Select Save.
6.4 Storing and archiving images
Image storage is provided by OptosAdvance.
Storage status and archive configurations are accessed by selecting Settings > Device > Dicom.
Your Administrator is responsible for maintaining the storage and archive settings. You can get help storing
and archiving in the OptosAdvance help files or contact your Optos representative (see Contact us on
page79).
You should check your available server storage and back-up your image server data at least once a week.
6.5 Managing connections
The ability to edit network settings is restricted to System Administrators.
If there are any connection problems ask your System Administrator to review your settings and where
necessary contact your Optos representative for instructions on how to proceed (see Contact us on
page79).
6.6 Managing the Modality Work List
The patient search will fail if MWL is temporarily unavailable. Select Add a new patient to create a new
patient record to allow you to capture images and scans. The new patient record will need to be reconciled
using OptosAdvance.
Page 56 of 84 Part Number: G110230-003-ENG
English Copyright 2019-2021, Optos plc. All rights reserved.