Chapter 8 - Technical Specification
Feature description Compliance
Power Consumption
The touch screen MUST be powered through
the scan head and is included in these figures.
289-350VA
3.5A at 100-120Vac
1.75A at 200-240Vac
SMPS continuous
Touch screen voltage +12V
9.1.2 Connections
These connections are NOT intended to be detached by the user.
FIGURE 23: Sample of the connection label
No. Description
1
Mains power cable and switch
l Protective earth must be fitted.
l U.K. Power Cable Fuse: 13A
2 Network cable
3 Hand control and Optos Service use
4 Touch screen
Page 70 of 84 Part Number: G110230-003-ENG
English Copyright 2019-2021, Optos plc. All rights reserved.
To Next Page
Loading...
