Optos P200TxE - Page 6

3.2 Use standby mode at the end of each day 30
3.2.1 How to shut down the scan head 31
3.2.2 Install software updates 31
3.2.3 Log off the image server each day 31
3.2.4 Restart the image server each week 32
3.3 Use the system 32
3.3.1 Using the touch screen 32
3.3.2 Using the touch screen keyboard 33
3.3.3 Using the hand control 33
3.3.4 Using the chin rest and head rest 34
4 Capture images 35
4.1 Selecting and managing patient details 35
4.1.1 Adding a new patient 36
4.1.2 Selecting and editing existing patient 36
4.1.3 Selecting a Patient Order from MWL 36
4.1.4 Working with Modality Work List (MWL) 36
4.1.5 How to search using MWL 36
4.2 How to prepare for image capture 36
4.3 How to align the patient 37
4.3.1 Patient coaching 37
4.3.2 Align the patient 37
4.4 How to capture SLO images 39
4.4.1 What to do after the image is captured 40
4.5 How to capture SLO eye steered images 40
4.6 How to capture SLO stereo images 41
4.7 How to capture SLO angiography images 42
4.7.1 Control contrast 42
4.8 How to capture OCT images 43
4.8.1 The patient's view of OCT alignment 44
4.8.2 How to optimize OCT scan quality 44
4.8.2.1 Capture scans quickly and recapture if necessary 45
4.8.2.2 Using the auto-routines 45
4.8.2.3 Live OCT positioning 45
4.8.2.4 Minimizing eye dryness 45
4.8.3 How to capture an OCT follow-up scan 45
Page 6 of 84 Part Number: G110230-003-ENG
English Copyright 2019-2021, Optos plc. All rights reserved.