Configuring the System
The shell interface configuration screen appears. The <=> character is displayed next to NET-0
near the top of the screen. If <X> appears by NET-0, check that all cable connections are
secure.
Sun ZFS Storage 7120 Configuration
Copyright (c) 2008, 2013, Oracle and/or its affiliates. All rights reserved.
NET-0 <=> NET-1 <X> NET-2 <X> NET-3 <X>
Host Name: hostname
DNS Domain: us.oracle.com
IP Address: 192.168.1.10
IP Netmask: 255.255.254.0
Default Router: 192.168.1.1
DNS Server: 192.168.1.1
* Password: @@@@@@@
* Re-enter Password: @@@@@@@
Please enter the required (*) configuration data
ESC-1: Done ESC-2: Help ESC-3: Halt ESC-4: Reboot ESC-5: Info
For help, see http://www.oracle.com/goto/zfs7120
6.
Verify the information on the screen and enter values for fields that are not
populated.
7.
To apply all of the values, either press ESC-1 or F1, or press Enter after
confirming your new password.
The final screen appears, confirming that your appliance is ready for initial configuration. Two
web browser links are shown for configuration using the browser user interface (BUI); you can
use either the host name, if assigned, or the IP address.
Sun ZFS Storage 7120 Configuration
Copyright (c) 2008, 2013, Oracle and/or its affiliates. All rights reserved.
Your new appliance is now ready for configuration. To configure your
appliance, use a web browser to visit the following link:
https://hostname.us.oracle.com:215/
If your network administrator has not yet assigned the network name you chose
for the appliance, you can also configure your appliance using the link:
https://192.168.1.10:215/
186 Oracle ZFS Storage Appliance Installation Guide • December 2016
To Next Page
Loading...
Need help?
General