Performing Initial Configuration (BUI)
a.
Click CONFIGURE for the appropriate service, set its parameters, and click
APPLY.
b.
When the summary of Name Services settings is displayed, click COMMIT if
all settings are complete and correct. Otherwise, click CONFIGURE to adjust
the settings for a service.
11.
Configure storage pools and click COMMIT.
For detailed information, see “Configuring Storage” in Oracle ZFS Storage Appliance
Administration Guide, Release OS8.6.x.
12.
Perform one of the following steps:
■ To register your appliance for remote support, complete the fields and click
REGISTER.
198 Oracle ZFS Storage Appliance Installation Guide • December 2016
To Next Page
Loading...
Need help?
General