OPTIMOD-FM INSTALLATION
2-49
Valid arguments follow the same rules for passcode entries made from the front
panel and via 8400PC:
• Passcode length must be 1– 8 characters
• Only alphanumeric characters are allowed (0…9 and A…Z). No punctuation
or extended characters are allowed.
• Lower case letters included in the argument will automatically be converted
to upper case.
3. To change the IP Address:
Command Response
IP XXX.XXX.XXX.XXX«
(valid IP address)
IP: xxx.xxx.xxx.xxx entered«
(invalid IP address)
ERROR. Using IP: yyy.yyy.yyy.yyy«
IP?«
Using IP: yyy.yyy.yyy.yyy
«
In the above table:
XXX.XXX.XXX.XXX is the specified IP address;
yyy.yyy.yyy.yyy is the present (or default) IP address in use.
Any out-of-range or invalid characters render invalid the whole IP address that
you entered.
4. To change the Subnet Mask:
Command Response
SN XXX.XXX.XXX.XXX«
(valid subnet)
SN: xxx.xxx.xxx.xxx entered«
(invalid subnet)
ERROR. Using SN: yyy.yyy.yyy.yyy«
SN?«
Using SN: yyy.yyy.yyy.yyy«
In the above table:
XXX.XXX.XXX.XXX is the specified subnet mask;
yyy.yyy.yyy.yyy is the present subnet mask in use.
Valid subnet masks are defined according to existing standards. Any out-of-
range or invalid characters render the whole argument invalid.
To Next Page
Loading...
Need help?
General
