- 74 -
≥ Register “Level Gauge” to a USER button. (l 65)
This function displays the horizontal/vertical tilt of the unit with the electronic level.
∫ To correct the tilt
≥ The horizontal tilt display A and vertical tilt display B appear yellow when there is a tilt, and
appear green when there is almost no tilt.
≥
The maximum tilt display angles are approximately 45
o
in horizontal direction and 10
o
in vertical direction.
≥ The electronic level does not affect the actual recorded images.
≥ This function is not available in the following cases:
j During Freeze Frame (l 71)
j When color bars are displayed. (l 80)
≥ If [SELF SHOOT] (l 133) is set to [MIRROR], the electronic level will not be displayed when you
record yourself.
≥ Even when the tilt is in the corrected state, an error of approximately 1 o may occur.
≥ In the following cases, the electronic level may not be displayed correctly:
j When moving this unit
j When pointing this unit up or down at an angle closer to perpendicular
Level Gauge
(Horizontal direction) (Vertical direction)
When correcting the leftward tilt When correcting the downward tilt
R68S3_PJPB.book 74 ページ ２０１６年９月２日 金曜日 午前１０時４３分
To Next Page
Loading...
