118
Setup Utility
• When the Setup Utility is started up:
The password becomes necessary. This alternative can prevent the contents of the
Setup Utility from being changed
z If you fail to press the
F2
key at the right moment, the Setup Utility will not start up. In
this case, let the computer fully boot up, and then perform a shutdown or restart from
Windows.
z To close the Setup Utility:
A Press the
Esc
key.
B Select the exiting method from the [Exit] menu and press the
Enter
key.
C Select [Yes] and then press the
Enter
key.
Key Operations
z
F1
To display the corresponding "help" file (Press the
F1
key to return to the original screen)
z
Esc
To display the [Exit] menu
zÏ
Ð
To move among the items (Use these keys when selecting the item)
zÍ
Î
To move among the menus (Use these keys when the [Information], [Main], [Advanced],
[Security], [Boot], or [Exit] menu is selected)
z
F5
Select previous item (Use this key when changing setting values)
z
F6
Select next item (Use this key when changing setting values)
z
Enter
To display sub-menu of each item (Use this key after selecting the item by using the Ï key
or the Ð
key)
z
F9
To set default settings (except the password, System Time and System Date)
z
F10
To save the settings and exit
To Next Page
Loading...
