Panasonic CU-8ME1XPK - Page 111

Test Operation PACD011001C2
90 Test Operation Urban Multi “MX1, ME1 Series” Using R-22
Supplement
„
Supplement to
1.9.3
and
1.9.4
If using several adaptor PCB and you want to select cool/heat mode for each adaptor PCB, set DS1 / DS2
of the adaptor PCB and the cool/heat group address on the outside unit’s PCB to the same setting in
setting mode 2.
Adaptor
PCB
No. 0
Outdoor unit
group master
No. 0
Outdoor unit
group slave
No. 0
Outdoor unit
group slave
No. 0
Cool/heat group address ¡ llllll
DS2·DS1
Adaptor
PCB
No. 1
Outdoor unit
group master
No. 1
Outdoor unit
group slave
No. 1
Cool/heat group address ¡ lllll ¡
DS2·DS1
Adaptor
PCB
No. 2
Outdoor unit
group master
No. 2
Outdoor unit
group slave
No. 2
Outdoor unit
group slave
No. 2
Cool/heat group address ¡ llll ¡ l
DS2·DS1
Adaptor
PCB
No. 3
Outdoor unit
group master
No. 3
Outdoor unit
group slave
No. 3
Cool/heat group address ¡ llll ¡¡
DS2·DS1
(VL028)