Test Operation PACD011001C2
100 Test Operation Urban Multi “MX1, ME1 Series” Using R-22
1.16 Remote Controllers (Wired and Wireless)
By making use of optional liquid crystal indoor unit remote controller switches, you can construct a versatile
control system.
The remote controller control wiring for simplified remote controllers (CZ-02RE11P / CZ-03RE11P) is the
same as that of standard remote controllers (CZ-01RT11P), but since the functions of the simplified remote
controllers are limited, we recommend they should be used together with a central remote controller.
Appearance /
Functions
‹
Large liquid crystal screen that displays operating status in detail.
‹
Preset temperature is indicated in digital display, and can be set in 1°C increments.
‹
Display of malfunction is also available for air cleaner units.
‹
Operation can be individually programmed to start and stop time up to 72 hours in advance.
‹
The remote controller is equipped with a thermostat sensor to realize better room temperature control.
‹
Room temperature and preset temperature are monitored by microcomputer, and cool/heat operation
mode is selected automatically. (Applies only to simultaneous cool/heat type only)
‹
Cool, heat or fan operation mode can be selected by any indoor unit remote controller without using the
cool/heat selector switch. (Applies to all UM Series equipment)
‹
The system can be monitored for malfunctions covering 40 items. Equipped with a “self-diagnosis
function” which displays a message to let you know immediately when a malfunction occurs.
‹
Field settings can be made by remote controller.
To Next Page
Loading...
