PACD011001C2 Test Operation
Test Operation Urban Multi “MX1, ME1 Series” Using R-22 113
Operation Contents
and Function
If you set a Master remote controller
(Remote controller not displaying
<CHANGEOVER UNDER CONTROL>)
The other remote controllers (Remote
controllers displaying
<CHANGEOVER UNDER CONTROL>)
1.
to COOL/HEAT
l
switch to the operation mode set
by the master remote controller.
l
However, they can switch to FAN
operation and from COOL to
If you set a Master remote controller
(Remote controller not displaying
<CHANGEOVER UNDER CONTROL>)
The other remote controllers (Remote
controllers displaying
<CHANGEOVER UNDER CONTROL>)
2.
to FAN,
l
cannot set any mode other than
FAN.
(VL049)
To Next Page
Loading...
