Panasonic CU-8ME1XPK - Page 342

PACD011001C2 Test Operation
Test Operation Urban Multi “MX1R, ME1R Series” Using R-407C 321
Operation Contents
and Function
If you set a Master remote controller
(Remote controller not displaying
<CHANGEOVER UNDER CONTROL>)
The other remote controllers
(Remote controllers displaying
<CHANGEOVER UNDER CONTROL>)
1.
Set to Cool/Heat/Auto
l switch to the operation mode set
by the master remote controller.
l However, they can switch to FAN
operation and from COOL to
DRY.
If you set a Master remote controller
(Remote controller not displaying
<CHANGEOVER UNDER CONTROL>)
The other remote controllers
(Remote controllers displaying
<CHANGEOVER UNDER CONTROL>)
2.
Set to FAN,
l cannot set any mode other than
FAN.
(VL049)