•
You
can enjoy high-quality picture and audio by changing the audio/video
(AV)
cable connection between this unit
and your TV on pages 8 to 10 as follows.
Connecting
to
a TV
with
an HDMI (High Definition Multimedia Interface) Cable
When connected to an HDMI compatible unit, an uncompressed digital audio and video signal is transmitted,
enabling
you
to enjoy high quality digital video and audio with just one cable. When connecting to an HDMI-
compatible HDTV (High Definition Television), the output can be switched to 1080p, 1080i
or
720p HD video.
r
.,'6!9at'CIl~~PAVf
~Qrltr§l'i
fUnction
When connecting with a Panasonic TV (VIERA) or a receiver equipped with "HDAVI Control" function, linked
operations are possible.
[-+
34, Linked Operations with the TV (VIERA
Link™
"HDAVI ControI™'')]
• Please
use
HIGH SPEED HDMI
cables
that
have
the
HDMIIogo
(as
shown
on
the
cover). It is
recommended that you use Panasonic's HDMI cable.
Recommended part number: RP-CDHG1 0 (1.0 m/3.3
ft.), RP-CDHG15 (1.5 m/4.9 ft.), RP-CDHG20
(2.0 m/6.6
ft.), RP-CDHG30 (3.0 m/9.8 ft.), RP-CDHG50 (5.0 m/16.4 ft.), etc.
• Non-HDMI-compliant cables cannot be used.
• Set "HDMI Priority" and "HDMI Audio Output" to "On"
(-+
54, 55). (The default setting is "On".)
§ Notes
• If connecting to equipment that is only compatible with 2 channels output, audio with 3 channels or more will be
down-mixed
(-+
77) and output as 2 channels (some discs cannot be down-mixed).
• For display units compatible with HDCP (High bandwidth Digital Content Protection) that are equipped with a
digital
DVI
input terminal (PC monitors, etc.):
Depending
on
the unit, images may not display properly or at all when connecting with a DVI/HDMI switching
cable (audio cannot be output).
RQT9046
To Next Page
Loading...
Need help?
General
