oStart play on the external device.
REC
o
~
to start recording the
program from an external device.
lrJ
Tips
•
You
can also connect to the
IN1
on
the rear.
o If the external equipment only has a single audio output connect it
to
the
UMONO
(white) IN2 terminal.
To
skip
unwanted
parts
Press
[II
PAUSE] to pause recording. (Press again to restart
recording.)
To
stop
recording
Press
[.
STOP].
@ Notes
If video is copied from another piece of equipment to this unit, then
the video quality will be degraded.
Recording from a
DV
Camcorder
Connect the cable while the power to both the unit and
the external device is off.
Front of the unit
- - -
.-
• 0
.~.
",
...
. ,-
~
DVIN
o
4-pin
DV
Cable
Preparation:
• Turn on the unit.
• Insert a disc with enough remaining blank space.
•
IiBm
If the disc is protected, release protection
(~
44).
oTurn ON the
DV
equipment and
pause play where you want to
begin recording.
111
__
-~?
.
'-
When
"DV camcorder connection" screen does not
appear
After performing step 1
(-+
above).
1.
Press [DRIVE SELECT] to select the
DVD
drive.
2.
With the unit stopped
Press [FUNCTIONS].
3.
Press
[.,
T]
to select "Other Functions" then press [OK].
4.
Press
[.,
T]
to select
"DV
Camcorder
Rec."
then press [OK].
You
can proceed to step 3
(-+
below).
a
~
to select "Record to DVD", then
press~
RECMOOE
E)
~
to select the recording
mode
(~21)
.
o
~
to select "Rec.", then
~
@ Notes
• If the desired audio is not recorded, select the kind of audio for
"Select Audio Channel For
DV
Input"
in
the Setup menu
(-+
52).
0lm'!i!il
Programs are recorded as a single item; breaks
in
the images
create chapters.
o Compatibility with video camcorders from other manufacturers is
not guaranteed.
•
It
is
not
possible
to
operate
the
unit
from
the
connected
DV
equipment.
• The
Dv
equipment name may not be shown correctly.
• Date and time information is not recorded, even if displayed on the
camcorder.
• The
Dv
IN
terminal is not meant to be connected to a computer.
• This unit uses a 4-pin
"Dv
IN" connector;
Your
DV
camcorder may use a 4-pin or 6-pin external connector.
Please consult your
DV
camcorder's manufacturer to confirm
correct external connection.
o
You
cannot record discs and play discs simultaneously.
•
If
video is copied from another piece of equipment to this unit, then
the video quality will be degraded.
lrJ
Tips
When
recording
finishes
The confirmation screen appears.
Press [OK]
to
finish
Dv
camcorder recording.
To
stop
recording
Press
[.
STOP].
The confirmation screen appears. Press [OK].
o
If
the
Dv
camcorder recording function does not work properly,
check the connections and
Dv
equipment settings, and turn the
unit off and back on. If that does not work, follow the instructions
for "Recording from a VCR, etc."
(-+
24).
RQT9046
To Next Page
Loading...
Need help?
General
