Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and
the
applicable safety instructions
listed below. Keep these operating instructions
handy
for future reference.
1)
2)
3)
4)
5)
6)
7)
8)
9)
Read these instructions.
Keep these instructions.
Heed
all warnings.
Follow all instructions.
Do not use this apparatus
near
water.
Clean only with
dry
cloth.
Do not block any ventilation openings. Install in accordance
with the manufacturer's instructions.
Do
not
install
near
any
heat
sources
such
as
radiators, heat
registers, stoves,
or
other apparatus (including amplifiers) that
produce heat.
Do
not
defeat the safety
purpose
of
the polarized
or
grounding-
type plug. A polarized plug
has
two
blades with one wider
than the other. A grounding-type plug has two blades and
a third grounding prong.
The
wide blade
or
the
third prong
are
provided for your safety. If
the
provided plug does
not
fit
into your outlet, consult an electrician for replacement of the
obsolete outlet.
10)
11
)
12)
13)
14)
Protect the power cord from being walked on
or
pinched
particularly at plugs, convenience receptacles, and
the
point
where
they exit from the apparatus.
Only
use attachments/accessories specified by
the
manufacturer.
Use
only with the cart, stand, tripod, bracket,
or
~
table specified by the manufacturer,
or
sold with
the
apparatus. When a
cart
is used, use caution
when
moving the cart/apparatus
combination
to
avoid injury from tip-over.
Unplug this apparatus during lightning
storms
or
when
unused for long periods
of
time.
Refer all servicing to qualified service personnel. Servicing
is required when the apparatus
has
been
damaged
in
any
way,
such
as power-supply cord
or
plug is
damaged,
liquid
has been spilled
or
objects have fallen into the apparatus, the
apparatus has been exposed to rain
or
moisture,
does
not
operate normally,
or
has been dropped.
Unit Care
The
precision
parts
in
the
unit
are
readily
affected
by
the
environment,
especially
temperature,
humidity,
and
dust.
Cigarette
smoke
also
can
cause
malfunction
or
breakdown.
•
Do
not place the unit on
amplifiers
or
equipment
that may become hot.
The heat can
damage
the unit.
• Do not place any heavy
objects on
top
of
the unit.
• The unit should not
be
mounted
in a vertical position. It's designed
to operate in the horizontal position.
• Before moving the unit, ensure the
disc
tray is empty.
Failure to
do
so will risk severely
damaging
the
disc
and the unit.
• Cautions about condensation
Condensation can cause unreliable playback
of
recordings.
Condensation may form in the following cases,
•
The
unit is brought from cold surroundings into a well-heated room.
•
The
unit is SUddenly brought from cool surroundings, such as an
airconditioned room
or
car, to a place which is hot and humid.
• During rainy seasons.
In
any
of
the above-mentioned conditions,
do
not
operate the unit for
at
least 2 hours. The unit is
not
equipped
with a moisture sensor.
• Maintenance
To
clean
the
unit
Wipe
with a soft,
dry
cloth.
• Never use alcohol, thinner
or
benzine to clean the unit.
• Before using chemically treated cloth, carefully read
the
instructions
that
came
with the cloth.
To
clean
the
DVD
lens
Dust and
dirt
may adhere to the unit's
lens
over time, possibly making
it impossible to record
or
play discs.
Use
the
DVD lens cleaner
about
once
every year,
depending
on
frequency
of
use and the operating environment.
Carefully read the lens cleaner's instructions before use.
DVD
lens
cleaner:
RP-CL720PP
• When the unit is not to be used for a long time
To
save power, unplug the AC
power
supply cord from the household AC outlet. This unit
consumes
a small
amount
of
power, even
when
it is
turned off.
Standby
power
consumption
1-·
Front Display
(~
52)
Automatic Bright
Quick
Start
(~
49)
I
On
Approx. 14.1 W Approx. 14.1 W
I
Off
Approx. 0.9 W Approx. 2.5 W
RQT9046
To Next Page
Loading...
Need help?
General
