Advanced Recording
----------~----~
Selecting
Audio
Channels
to
record
Refer to "Recording of multilingual broadcasts" for
detailed information
(~
20).
( When receiving an analog broadcast )
IiJI!mlI
iili!Ml1m
nmm
mm
Select the audio (Main
or
SAP)
in
"Multi-channel TV
Sound (Analog)" in the Setup menu
(-+
51).
Im1!
Specifying
the
Recording
Time
ImmI
IDI!mlI
iili!Ml1m
nmm
mm
This function allows specifying the length of recording
time up to 4 hours.
During recording
REC
~
repeatedly until the desired
time is reached.
Changing during recording changes the recorded
sound.
AUDIO
~
to select the audio.
Stereo
~
SAP
~
Mono
t I
Stereo:
SAP:
Main audio (stereo)
If the broadcast is "Mono+SAP", audio will be
monaural even if ou select Stereo mode.
Secondary audio program (SAP).
When you record
SAP,
main audio is also recorded.
In
such cases, recorded SAP and main audio become
monaural.
- The recording time and the unit's display change
as follows:
Counter (Cancel)
~OFF
0:30
~OFF
1:00
t t
OFF 4:00 OFF 1:30
~
OFF 3:00
~
OFF
2:00
~
@ Notes
• This function does not work during scheduled recording or Flexible
Recording.
• Recording stops and the set time is cleared if you press
[.
STOP].
• The unit turns off automatically when the time to stop recording is
reached as long as you
do
not operate the unit.
AUDIO
~
to select the audio.
(;:W~he~n~re~c~e~iV~in~g~a~d~i9~it~a~1
b~r~o~a~dc~a~s~t~~~~)
oWith the unit stopped
FRee
~
eWhen you want to start recording
.,
T,~,
~
to select "Start", then
~
- Recording starts.
a
~,
~
to select "Hour" and "Min:'
and
.,
T to set the recording time.
Flexible
Recording
ImmI
IDI!mlIIiMM
1m
nmm
mm
The unit sets the best possible picture quality that fits
the recording within the remaining disc space.
The recording mode becomes
FR
mode. Refer to "FR
(Flexible Recording)"
(~
21).
@ Tips
To
exit the screen
Press [RETURN).
To
stop recording partway
Press
[.
STOP).
To
show the remaining recording time
Press [STATUS] to show the remaining recording time.
• R.m,;o;ogl,m.
Main audio (monaural).
Select "Mono" if reception is poor during a stereo
broadcast.
Mono:
ii
VD'RAM'
e.g., "English" is selected •
@ Notes
You
cannot change the audio type in the following case.
- While a disc other than DVD-RAM is inserted when selecting an
analog broadcast
@ Notes
•
You
cannot change the audio type
in
the following case.
- When there is no choice
of
languages
in
a digital broadcast
• Before scheduled recording of a digital broadcast with more than
one language channel, set the language
in
"Multi-channel TV
Sound (Digital)"
in
the Setup menu
(~51).
• When broadcast offers no language data, such displays as "Audio
1 of
3"
may appear. In such cases, recording may not be possible
in the language selected through the "Multi-channel TV Sound
(Digital)"
in
the Setup menu
(~51).
To Next Page
Loading...
Need help?
General
