Setup Menus
( DTS* )
E)
.,
T to select "On-screen
Language", then
G%
.
o
.,
T
to
select "Automatic" or "Off",
thenG%
On-screen Language
Status Messages
0.,
T
to
select "English", "Espanol"
or "Fran(fais", then
~
Choose whether to show status messages
automatically
or
not.
Perform step 1 of "Accessing the Setup Menus"
(~
46).
(a., T
to
select "Display",
then.
)
E)
.,
T to select "Status
Messages", then
G%
Choose the language for these menus
and
the on-
screen messages.
Perform step 1 of "Accessing the Setup Menus"
(~
46).
(a.,T to select "Display",
then.
)
Digital
Surround
Choose whether to output
by
"Bitstream", which processes
DTS
signals
on
other connected equipment, or to convert
the signals to "PCM" (2ch)
on
the unit before output.
~db
[Bitstream] When you have connected the unit to
equipment displaying the Dolby Digital logo.
When
you
have
connected
the
unit to
equipment that doesn't
have
Dolby
Digital
logo.
[PCM]
~
SURROUND
( Dolby Digital* )
Choose whether to output
by
"Bitstream", which processes
Dolby Digital signals
on
other connected equipment, or
to
convert the signals
to
"PCM"
(2ch)
on
the unit before output.
D[]I
DOLBY
I
DIGITAL
o
.,
T to select "Bitstream" or "PCM",
thenG%
After selecting "Digital Audio Output"
(~
51, step 3)
o
.,
T
to
select "Dolby Digital", then
G%
After selecting "Digital Audio Output"
(~
51, step 3)
o
.,
T
to
select "DTS", then
G%
0.,
T to select "Bitstream" or "PCM",
thenG%
[Bitstream] When you have connected the unit to
equipment displaying the DTS logo.
[PCM] When you have connected the unit to
equipment that doesn't have DTS logo.
* Incorrect settings
can
cause noise to
be
output which
can
be
harmful to your ears and speakers, and audio will
not
be
recorded properly
on
media such
as
mini discs.
Select Audio Channel For
DV
Input
You
can select the kind of audio when recording from
the unit's
DV
IN
terminal
(~
25).
Perform step 1 of "Accessing the Setup Menus"
(~
46).
(a., T
to
select "Audio",
then.
)
E)
.,
T to select "Select Audio
Channel
For
DV
Input", then
G%
Black Background (Analog)
Select whether to show the black (gray) background,
normally shown when TV reception is poor.
Perform step 1 of "Accessing the Setup Menus"
(~
46).
(a., T
to
select "Display",
then.
)
E)
.,
T
to
select "Black Background
(Analog)", then
G%
o
.,
T to select "On" or "Off", then
C%
0.,
T to select "Stereo
1",
"Stereo
2"
or "Mix", then
G%
[Stereo
1]
Records audio (L
1,
R1)
(0
[Stereo 2] Records added audio such as narration
52 (L2, R2) subsequent to original recording.
[Mix] Records both Stereo 1 and Stereo 2.
Front Display
Changes the brightness
of
the unit's display.
Perform step 1 of "Accessing the Setup Menus"
(~
46).
(a., T to select "Display",
then.
)
RQT9046
To Next Page
Loading...
Need help?
General
