Panasonic Diga DMR-EZ28 User Manual

oThe types of transmission:
• , T to select "Antenna" or
"Cable", then
~
o ~ to start automatic channell
clock setting.
eConfirm the time, then ~
- DST (Daylight Saving Time) shows the
summertime setting.
- Time Zone shows the time difference from
Greenwich Mean Time (GMT).
See "Notes"
(0+ right)
© Tips
• If the unit displays "No channels were found,", turn off the unit
and confirm the cable or antenna input is connected to the RF
IN
terminal. Restart the set up again (-+ below).
• If
"Auto Clock Setting is incomplete," is displayed, press [OK)
and set the clock manually
(-+ right).
• If the clock is not correct, set the clock with "Adjust Time Zone"
(-+ 49) or "Set Clock Manually" (-+ 49).
•
You can delete channels you don't need after completing Auto
Channel Setting
(-+ 46).
Restarting the Auto-Setup
(after relocation, for example)
1. When the unit is on and stopped, press and hold [CH V] and
[CH
1\) on the main unit at the same time for about 5 seconds.
The unit turns off.
2. Press [6 DVD POWER] to turn the unit on.
(The signal source and channel captions revert to their default
values. All scheduled recordings are cleared.)
To cancel
in the middle
Press [RETURN).
@ Notes
Conditions of the received channel may cause automatic channell
clock setting
to take extra time.
(Manual Clock Setting )
Perform steps 1-5 on page 12.
o ~, ~ to select the item you want
to change.
o ., T to change the setting.
- Repeat steps 6-7 to change other items.
e ~ to confirm new date and
time.
- The clock starts.
@ Notes
• The automatic clock setting can take a few minutes.
•
Time Zone
EST (Eastern Standard Time) = GMT -5
CST (Central Standard Time) = GMT --6
MST (Mountain Standard Time) = GMT -7
PST (Pacific Standard Time) = GMT -8
AST (Alaska Standard Time) = GMT -9
HST (Hawaii Standard Time) = GMT -10
For other areas: xx hr
• DST
(Daylight Saving Time)
If you select "On", the clock is advanced one hour beginning at 2
a.m. on the second Sunday
in March and ending at 2 a.m. on the
first Sunday in November.
Set the DST period manually when it varies according to regions
(-+ below).
To
set the DST period manually
1. Press [SETUP].
2. Press LA.. T) to select "Setup" then press [~).
3. Press [A.. T) to select "Clock Settings" then press [OK].
4. Press
[A., T] to select "Set the time change dates for DSr then
press [OK).
5. Press
[A., T, ~,~) to set the "Month", "Day", "Hour", and "Minute"
then press [OK].
Reinitializes the
settings.
RQT9046

Panasonic Diga DMR-EZ28 Specifications

General

Brand	Panasonic
Model	Diga DMR-EZ28
Category	DVD Recorder
Language	English