To Next PageTo Next PageHow to fix colour balance issues on my Panasonic HC-V100M when recording indoors?
If you're experiencing strange color balance while recording with your Panasonic Camcorder in places like a gymnasium, try adjusting the White Balance setting to (Indoor mode 2). If the issue persists, switch to (Manual adjustment mode).
What to do if my Panasonic HC-V100M displays 'ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN'?
If your Panasonic Camcorder shows the error message “ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN,” restart the unit by turning it off and then on again. If the message continues to appear after restarting, the unit may require repair.
Why does my Panasonic Camcorder battery run down quickly?
There are several reasons why your Panasonic Camcorder battery might be draining faster than expected: * Ensure the battery is fully charged. * In cold environments, battery life is reduced. * The battery may be old and worn out, requiring replacement if its operating time is significantly reduced even after a full charge.
Video or audio is not output even though Panasonic Camcorder is connected to TV correctly. What to do?
If video or audio is not output even though your Panasonic Camcorder is connected to the TV correctly: * Select the correct channel on your TV that matches the input used for the connection. * Adjust the [TV ASPECT] setting to match the TV's aspect ratio. * Adjust the unit's settings based on the cable connection to the TV. * Note that no audio will play on the TV during recording mode. * Adjust the volume on your television, as the unit's volume cannot be adjusted during playback to a TV.
What to do if the SD card is not recognised by my Panasonic Camcorder?
If your Panasonic Camcorder doesn't recognize the SD card, it might be because the card was formatted on a PC. Use the camcorder itself to format SD cards for optimal compatibility.
Why is my Panasonic Camcorder turning off automatically?
Your Panasonic Camcorder might be turning off automatically because of the VIERA Link function. If the unit turns off when you turn off the power to the TV using the TV remote control, the VIERA Link is at work. To prevent this, set [VIERA Link] to [OFF] if you are not using it.
How to fix Panasonic Camcorder when it arbitrarily stops recording?
If your Panasonic Camcorder stops recording unexpectedly, consider the following: * Ensure you are using an SD card suitable for motion picture recording. * Format the SD card or built-in memory using the camcorder to address potential data writing speed issues. * If [AGS] is [ON], record in the normal horizontal position or set [AGS] to [OFF].
What to do if my Panasonic HC-V100M cannot be operated even though it is turned on?
If your Panasonic Camcorder is on but not responding, try the following: 1. Remove the battery or AC adapter. 2. Wait for about 1 minute. 3. Reconnect the battery or AC adapter. 4. Wait another minute, then turn the unit on again.
To reduce the risk of fire, electric shock or product damage.
Guidelines for using and handling lithium-ion battery packs.
Avoid shock hazard, do not expose to moisture, handle SD cards carefully, avoid sun/high temperatures.
Do not aim camera at sun, avoid sudden temperature changes, turn off when not in use.
Steps to insert the battery correctly into the camera.
Procedure for connecting the AC adapter and charging the battery.
Instructions for safely inserting and removing SD cards.
Identifies and explains the purpose of each button, port, and component on the camera.
Details compatible batteries and power sources.
Provides estimated charging and recording times for different batteries and modes.
Guide on how to record motion and still pictures onto an SD card.
Explains how to power the device on and off using the power button or LCD monitor.
How to switch between recording and playback modes.
Guide for setting the camera's date, time, and world time.
How to power the camera on and off using the dedicated power button.
Using the LCD monitor's opening and closing to turn the unit on and off.
Steps to start recording motion pictures.
Steps to take still pictures.
How to select and play back recorded motion pictures and still pictures.
Identifies the button used for taking still pictures.
Identifies the control for zooming in and out.
Information on compatible batteries and warnings about counterfeit products.
Step-by-step guide for battery installation and removal.
Specifies compatible SD card types and speed ratings for recording.
Tips for steady motion picture recording, including zoom usage.
Guide for setting world time based on home and travel destinations.
Setting for enabling VIERA Link functionality.
Manually adjusting white balance for accurate color reproduction.
Detailed guide on using playback operation icons for motion pictures.
Deleting selected scenes or all scenes from the thumbnail view.
Steps for connecting the camera to various TV input terminals.
Step-by-step instructions for copying data between memory and SD card.
How to copy motion and still picture data to a PC's hard drive.
Troubleshooting steps for issues related to power and battery.
Solutions for when the camera stops recording unexpectedly.
Troubleshooting steps when the auto focus feature fails.
Solutions for when recorded content fails to play.
Solutions for no video/audio output or distorted images when connected to TV.
Solutions for when the camera is not detected by other devices via USB.
Solutions when the camera is not detected by the PC via USB.
Summary of warranty terms, including repair, replacement, or refund options.
Exclusions and limitations of the warranty coverage.
General warranty statement for Panasonic products sold in Canada.
Exclusions and limitations of the warranty coverage for Canadian customers.
Contact information for product operation and information assistance in Canada.
How to power the camera on and off using the power button.
Steps to start recording motion pictures.
Steps to take still pictures.
General