4.2.10 Placing the PBX on a Desktop
When placing the PBX on a desktop, make sure to follow these instructions.
WARNING
Be careful not to drop any components. Dropping components may damage them or cause an
injury.
CAUTION
• When the PBX is placed on a desktop, make sure that the PBX is placed as indicated in the diagram
below. Do not place it on its side or upside down.
• Do
not block the openings of the PBX. Allow space of at least 20 cm above and 10 cm at the sides of
the PBX.
• Make sure that the surface behind the PBX is not made of wood.
138 Installation Manual
4.2.10 Placing the PBX on a Desktop