Panasonic KX-NS1000 - 4.3.1.3 Trunk-to-TIE-to-Trunk Access

8.4.4 H.323 QSIG Network
This section gives an overview of
H.323 QSIG networks.
Image of a H.323 QSIG network:
Resources for Node 1
Node 1:
KX-NS1000
Resources for Node 2
Node 2:
KX-NCP500
H.323 QSIG
Network
Features
• H.323 QSIG networks can include non
-KX-NS1000 PBXs (e.g., KX-TDE200, KX-NCP500).
• Resources are not available to extension users of other PBX without explicit configuration.
Conditions
• PBXs in an H.323 QSIG network must be connected over a private IP network.
Bandwidth Requirements
Refer to "8.2.3 Bandwidth Assessment".
Required Items
• V-IPGW16: Virtual 16-Channel VoIP Gateway Card
Note
The following activation key is required for enhanced QSIG network features
(NDSS, Centralised Voice
Mail, etc.).
• KX-NSN002: Activation Key for QSIG Network (QSIG Network)
Networking Notes
When a KX-NS1000 is included in the H.323 QSIG network, the PBX must be specified as a Master unit.
Note
• For more details about H.323 QSIG networks, refer to
"4.3.1 TIE Line Service" in the Feature Guide.
• For details about configuring and programming a H.323 QSIG network, refer to "
TIE Line Access"
in the PC Programming Manual.
Installation Manual 371
8.4.4 H.323 QSIG Network