– SVM (Built-in Simplified Voice Message)
– PT system programming
– ISDN/Analogue remote maintenance
• When
the KX-NS300/KX-NS500/KX-NS700 PBXs are connected to the One-look network as a Slave unit,
some Web Maintenance Console screens or settings will be inactive. This means that the currently
displayed programming items are able to set.
The cases are below:
– Use site selection drop-down menu to the KX-NS300/KX-NS500/KX-NS700 from master unit
– Direct login to the KX-NS300/KX-NS500/KX-NS700
– In the Isolated mode
370 Installation Manual
8.4.3 Information about Slave Units
To Next Page
Loading...
