6.1 Information about Stacking PBXs
Stacking
KX-NCP series PBXs, KX-TDE series PBXs, KX-TDA series PBXs, or KX-TDA100D PBXs, with the
KX-NS1000 allows you to design your PBX communication environment taking advantage of existing facilities.
When PBXs are stacked, the KX-NS1000 will control communication, as well as all IP terminals on the site.
Note
The RS-232C ports of legacy gateways connected to a
KX-NS1000 are not available.
For details about connecting a KX-NS1020 as a legacy gateway to a KX-NS1000, refer to the
KX-NS1020 Installation Manual.
314 Installation Manual
6.1 Information about Stacking PBXs
To Next Page
Loading...
