4.6 Stacking Cards
4.6.1 STACK-M Card (KX-NS0130
)
Function
A stacking card to be installed in a KX-NS1000. Up to 2 legacy gateways can be connected.
This card can be used only with PCMPR Software Version 002.01000 or later.
To STACK-S (NCP) Card/STACK-S (TDE) Card
LEDs
Accessories and User-supplied Items
Accessories (included): Screws ´ 4
User-supplied
(not included): None
*1
*1
The necessary stacking cable to connect the STACK-M card and the STACK-S (NCP) or STACK-S (TDE) card is included with the
STACK-S (NCP)/STACK-S (TDE) card.
LED Indications
Indication Colour Description
Link 1
Link 2
Green Connection status indication for legacy gateway
• ON: Normal connection
• OFF: Connection error
Conditions for Connecting Legacy Gateways
Up
to 2 KX-TDA/KX-TDE/KX-NCP series PBXs, KX-TDA100D PBXs, and KX-NS1020 expansion cabinets can
be connected to a KX-NS1000 and used as legacy gateways under the following conditions:
Condition 1
You cannot connect legacy gateways of mixed categories to a KX-NS1000.
The following table shows the category number for each type of PBX:
168 Installation Manual
4.6.1 STACK-M Card (KX-NS0130)
To Next Page
Loading...
