Unsupported Item Default Setting
FWD/DND setting status (intercom/outside
calls)
Setting Cancelled
Monitor PBX ID Cleared
Trunk
Call Charge Total Total cleared
Traffic Data Cleared
Incoming Call Group
Message Waiting Cancelled
Incoming Log Cleared
FWD/DND setting status (FWD/DND set or
not)
Setting cancelled
Traffic Data Cleared
Verification Code Information
Verification Code Password, Lock Status Unlocked
Verification Code Password, Lock Counter Counter cleared
Call Charge Total Total cleared
Cabinet Information
Incoming Log Cleared
Outgoing Log Cleared
Line Error Log Cleared
MPR-LPR Call Data Log Cleared
System Information
Password, Lock Counter for Remote
Programming
Counter cleared
Major/Minor Error Cleared
Timed Reminder (Wake-up Call) Cancelled
Slave data converter
System data for the base KX-NS1000 can be acquired from a currently running unit using the
"File Transfer
PBX to PC" utility. Also, if the unit is not running, the new base KX-NS1000 system data can be created in
Off-line Web Maintenance Console. System data from a KX-TDE series PBX, KX-NCP series PBX, or
Installation Manual 207
5.3 Starting Web Maintenance Console
To Next Page
Loading...
