3 digits
Extension
Number
4 digits
Extension
Number
3 digits
Extension, 4
digits DISA &
UM channel
Number of UM Group 8 16 9
Extension Number 101–xxx 1001–xxxx 101–xxx
Floating Extension Number
UM Group 500–507 5000–5015 500–508
DISA (1–64) 536–599 5801–5864 5801–5864
TAFAS (Pager) 600 6000 600
ICD Group (1–64) 601–664 6001–6064 601–664
UM Channel (1–2) 508, 509 5101, 5102 5101, 5102
FAX Channel 510 5103 5103
e. Select one of the following options for System Capacity Selection.
– Standard Type
– IP-Extension Type
– System Resource Type
f. Click
the IP Extension Setting button on the Master site to configure an IP extension. For details, refer
to the following instructions.
Note
• You cannot configure IP extensions for Slave units.
• The following items can be configured. Click OK when you have finished.
<IP Extension Setting>
Specify a number for each category in Number of IP Extensions
– IP-PT for V-IPEXT32
– UT/UDT for V-UTEXT32
– SIP-Phone for V-SIPEXT32
g. Click the SIP Trunk Setting button on the master site to configure a SIP Trunk. For details, refer to
the following instructions.
Note
• You cannot configure SIP trunks for Slave units.
• The following items can be configured. Click OK when you have finished.
<SIP Trunk Setting>
Configure the following items for 1st Account Setting / 2nd Account Setting
– Number of SIP Trunk
– User Name
(64 characters)
– Authentication ID (64 characters)
– Authentication Password (32 characters)
– SIP Server Name / Outbound Proxy Name ( Max.100 characters)
– SIP Server IP Address
– SIP Server Domain / Proxy Domain ( Max.100 characters)
Installation Manual 221
5.4.1 Easy Setup Wizard
To Next Page
Loading...
