Master
Slave (When Slave unit power is
turned on before Master unit)
Slave (When Slave unit power is
turned on after Master unit)
Operation MASTER LED Operation MASTER LED Operation MASTER LED
Power On Amber
(Flashing)
Log in Amber
Power On Amber
(Flashing)
Log in Green
Add Site Wizard Green
Add Site Wizard
is Completed
Green Being
Registered
Amber
(Flashing)
Registration is
Completed
Amber Power On Amber
(Flashing)
Log in Amber
Being
Registered
Amber
(Flashing)
Registration is
Completed
Amber
Note
When adding KX-NS300
, KX-NS500, and KX-NS700 PBXs as Slave units, the PBX MODE LED of each
unit shows the One-look network registration status instead of the MASTER MODE LED of the
KX-NS1000. For details, refer to the Installation Manual of the corresponding PBX.
230 Installation Manual
5.5 Programming a One-look Network
To Next Page
Loading...
