5.
a. Click Setup ® PBX Configuration ®
Configuration ® Slot.
b. Click Virtual ® V-IPGW16.
c. Move the mouse pointer over the installed
V-IPGW16
card to display the menu of options, and
click Ins.
d. Repeat step c for each installed V-IPGW16 card until
all V-IPGW16 cards are INS.
Note
For
details about network parameter settings, refer to the relevant sections of the PC Programming Manual.
Installation Manual 237
5.6.3 Programming the Network Settings
To Next Page
Loading...
