Panasonic KX-NS1000 - Page 262

Note
The illustrations may differ from the buttons on your telephone.
KX-NT321/KX-NT551
To end programming
After assigning
the IP addresses
Select "QoS". Press SP-PHONE. Select "VLAN". Press SP-PHONE.
Press STORE.
Press HOLD three
times to return to the
Menu screen.
Select "VLAN (Enable)".
Press SP-PHONE.
VLAN ID
VLAN Priority
*1
To set the VLAN ID for the primary port
0–7
1–4094
0–4094
(Only for KX-NT551)
Select "Priority".
Select "VLAN (Primary)". Press SP-PHONE. Press SP-PHONE.
Select "VLAN ID".
Press SP-PHONE.
To set the VLAN ID for the secondary port
VLAN ID
VLAN Priority
*1
1–4094
0–4094
(Only for KX-NT551)
0–7
Select "VLAN (Secondary)".
Press SP-PHONE. Select "VLAN ID".
Select "Priority".
Press SP-PHONE.
Press SP-PHONE.
The IP-PT will reboot
and can then be
registered to the PBX.
*1
The VLAN priority of the primary port must be set higher than the priority of the secondary port. The larger the number, the higher
the priority.
262 Installation Manual
5.8.2 Setting VLAN Parameters