Panasonic KX-NS1000 - Page 266

KX-NT551
To end programming
Press STORE.
Press HOLD three
times to return to the
Menu screen.
To set the VLAN ID for the secondary port
VLAN ID
*1
VLAN Priority
*1*2
0–4094
0–7
Select "LLDP (Secondary)".
Press SP-PHONE. Select "VLAN ID".
Select "Priority".
Press SP-PHONE.
Press SP-PHONE.
After assigning
the IP addresses
Select "QoS". Press SP-PHONE. Select "LLDP". Press SP-PHONE.
Select "Enable" for
LLDP setting.
Press SP-PHONE.
VLAN ID
*1
VLAN Priority
*1*2
To set the VLAN ID for the primary port
0–7
0–4094
Select "Priority".
Select "LLDP (Primary)". Press SP-PHONE.
Select "VLAN ID".
The IP-PT will reboot
and can then be
registered to the PBX.
To set the Interval time for LLDP
INTERVAL
1–3600
Select "LLDP (Secondary)".
Press SP-PHONE. Select
"LLDP (Interval)".
Press SP-PHONE.
Press SP-PHONE.
*1
The VLAN ID and the VLAN priority are set automatically for the primary port; these are reference only. However, the VLAN ID and
the VLAN priority for secondary port must be set manually.
*2
The VLAN priority of the primary port must be set higher than the priority of the secondary port. The larger the number, the higher
266 Installation Manual
5.8.3 Setting LLDP Parameters