PROBLEM PROBABLE CAUSE SOLUTION
• The IP address of the
PBX
for networking has
been forgotten.
-
• Connect a PC to the MNT port of the PBX
directly and start the Web Maintenance
Console using the default IP address of
the MNT port, and then confirm the IP
address assigned for the LAN port.
For details of connecting the PC directly to
the PBX, refer to "5.2 PC Connection".
For details of checking current IP address
of the mother board, refer to
"28.1 Network Service—[1] IP Address/
Ports—
LAN Setting—IP Address" in
the PC Programming Manual.
Installation Manual 325
7.1.3 Operation
To Next Page
Loading...
