Example:
PBX Extensions Estimated Time for Starting Up
1 PBX
(Stand-alone)
128 KX-UT series SIP phones more than 5 minutes
16 PBXs
(One-look network)
256 KX-UT series SIP phones more than 15 minutes
• PBX functions cannot be used until restarting is complete. The use of a UPS is recommended; even
a
momentary power failure can result in a long delay as the PBX restarts, requiring the time as shown
above.
Installation Manual 329
7.1.5 Restarting the KX-NS1000
To Next Page
Loading...
