The VPSS information path refers to the information path that makes VPSS possible. Information is encrypted
with SSL, IPsec, etc., and exchanged securely.
Slave Site 2
Built-in
Router
KX-NS1000
Slave Site 1
Built-in
Router
KX-NS1000
Master Site
Built-in
Router
KX-NS1000
VPN
VPN
VPN
Features
• VPN Simple Settings can be activated in the Easy Setup Wizard.
For details, refer to "5.4.1 Easy Setup Wizard" in the Installation Manual.
• The following settings relating to VPSS can be changed manually.
Setting Description
VPSS Enabling/disabling VPSS
Per-site settings Specify a site number, and you can change whether VPSS is
enabled
or disabled, the Slave unit’s name, and other detailed
VPSS settings.
Conditions
• KX-NSN216 (16-channel IPsec Activation Key
) is required to use this feature.
• To connect PBXs over a VPN, the Master unit and backup Master unit must both have static IP addresses.
• Users cannot use the VPSS function when more than one KX-NS1000 is on the same local network. In
this type of configuration, the user must perform custom settings in whole or in part for a VPN connection.
• Local address subnets on the LAN side that overlap are not detected by VPSS.
398 Installation Manual
8.6.24 VPN—VPSS Setting
To Next Page
Loading...
