Panasonic KX-NT400

Note
• The cables can also be run from the bottom of the unit.
4. Drive 3 screws (included) into the wall as shown in the illustration below, and mount the KX-NT400 on the
wall.
83 mm
(3
1
/
4
in)
148
mm
(5
13
/
16
in
)
94
mm
(3
11
/
16
in)
Washer
Drive the screw
to this point.
Usage Tips
• You can find a wall mounting template at the end of this manual.
• For information about locking the handset, see "Hooking the Handset (Page 25)".
152 Operating Instructions Document Version 2010-01
Installation and Settings