Panasonic KX-NT400

Issue Possible Cause & Solution Reference
I cannot enter characters.
• You have already entered the maximum of 255 characters for
1 message.
→ Send the current message and then enter more
characters, or delete some characters in the current
message.
—
Portal
Issue
Possible Cause & Solution Reference
I cannot connect to a Web
site.
• The URL you specified is incorrect.
→ Confirm the URL in the Portal settings, and then try
connecting again.
Page 117
• You specified a domain name (e.g., "www.panasonic.com") in
the URL. Because the KX-NT400 does not support DNS
lookup, you can only access URLs by IP address.
→ Change the URL to specify the IP address for the desired
Web site.
Page 117
• The connection to the Web site might be inaccessible because
you need to access it through a proxy server. The
KX-NT400 does not support access through a proxy server.
→ Consult your administrator.
—
When I tap a link for a
phone number, the
number is not dialed
correctly.
• The number is invalid.
→ Tap the link for the phone number while on-hook and
confirm the number in the Dial window. If the number
appears valid, but is still dialed incorrectly, try dialing it
from another phone.
If the number is dialed correctly from another phone, check
the dial modification settings or consult your administrator.
Page 122
• The dial modification settings are configured incorrectly.
→ Confirm that the dial modification settings are configured
correctly. If you are unsure whether they are correct,
consult your administrator.
Page 122
• If you are dialing an outside number, a CO line might not be
available.
→ Wait a while, and then try again.
—
When I tap the Home
button, nothing happens.
• You have not specified a homepage. (If you have imported
settings from an SD memory card, no homepage will be set,
even if one was set when the settings were exported.)
→ Set a homepage in the Portal settings.
Page 117
Document Version 2010-01 Operating Instructions 189
Appendix