Panasonic KX-TDA100 - Page 823

3.2 Feature Programming References
PC Programming Manual 823
– Confirmation Tone—Tone 3-1 : Start Talking after making call / Call from Doorphone
– Confirmation Tone—Tone 3-2 : Start Talking after answering call
– Confirmation Tone—Tone 4-1 : Start Conference
– Confirmation Tone—Tone 4-2 : Finish Conference
– Confirmation Tone—Tone 5 : Hold
Feature Guide Reference
1.29.2 Confirmation Tone
D
Dial Tone
• 2.9.17 [2-9] System Options—Option 3
– Dial Tone—Distinctive Dial Tone
– Dial Tone—Dial Tone for Extension
– Dial Tone—Dial Tone for ARS
Feature Guide Reference
1.29.1 Dial Tone
Dial Tone Transfer
• 2.11.5 [4-1-4] Wired Extension—Flexible Button
– Type
– Parameter Selection (for TRS Level Change)
• 2.11.13 [4-2-3] Portable Station—Flexible Button
– Type
– Parameter Selection (for TRS Level Change)
• 2.11.17 [4-3] DSS Console
– Type
– Parameter Selection (for TRS Level Change)
Feature Guide Reference
1.9.4 Dial Tone Transfer
Dial Type Selection
• 2.8.11 [1-1] Slot—Port Property - LCO Port
– Dialling Mode
– DTMF Width
– Pulse Speed
• 2.8.19 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
– CO Dial Mode
– DTMF Width
– CO Pulse Speed
• 2.8.25 [1-1] Slot—Port Property - E1 Port
– CO Dial Mode
– DTMF Width
– CO Pulse Speed
• 2.8.28 [1-1] Slot—Port Property - EM Port (KX-TDA100/KX-TDA200/KX-TDA600 only)