Panasonic KX-TDA100 - Page 837

3.2 Feature Programming References
PC Programming Manual 837
– Ext. No. / Floating Ext. No. (for Log-in/Log-out)
• 2.11.17 [4-3] DSS Console
– Type
– Parameter Selection (for Log-in/Log-out)
– Ext. No. / Floating Ext. No. (for Log-in/Log-out)
• 2.18.1 [11-1] Main—SMDR—Print Information—Log-in / Log-out
Feature Guide Reference
1.2.2.7 Log-in/Log-out
M
Malicious Call Identification (MCID)
• 2.9.8 [2-6-1] Numbering Plan—Main—Features—MCID
Feature Guide Reference
1.21.1.9 Malicious Call Identification (MCID)
Manager Features
• 2.9.11 [2-7-1] Class of Service—COS Settings—Extension Feature—Manager
• 2.18.1 [11-1] Main—Password—Manager Password - PT Programming—Prog *1
Feature Guide Reference
2.2.6 Manager Features
Message Waiting
• 2.8.4 [1-1] Slot—Card Property - Extension Type—SLT Power Supply (KX-TDA100/KX-
TDA200/KX-TDA600 only)
• 2.9.8 [2-6-1] Numbering Plan—Main—Features—Message Waiting Set / Cancel / Call Back
• 2.9.10 [2-6-3] Numbering Plan—B/NA DND Call Feature—Message Waiting Set
• 2.9.17 [2-9] System Options
– Option 3—Dial Tone—Distinctive Dial Tone
– Option 4—SLT—Message Waiting Lamp Pattern (KX-TDA100/KX-TDA200/KX-
TDA600 only)
• 2.10.22 [3-8-1] VM(DTMF) Group—System Settings—VM DTMF Command—Listening
Message
• 2.11.1 [4-1-1] Wired Extension—Extension Settings—Main—SLT MW Mode (KX-TDA100/
KX-TDA200/KX-TDA600 only)
• 2.11.5 [4-1-4] Wired Extension—Flexible Button—Type
• 2.11.13 [4-2-3] Portable Station—Flexible Button—Type
• 2.11.17 [4-3] DSS Console—Type
Feature Guide Reference
1.19.1 Message Waiting
Multiple Subscriber Number (MSN) Ringing Service
• 2.17.2 [10-2] DIL Table & Port Settings—DDI / DID / TIE / MSN
– Distribution Method
– DDI/DID/TIE/MSN—Remove Digit
– DDI/DID/TIE/MSN—Additional Dial