1.18 Proprietary Telephone (PT) Features
Feature Guide 139
1.18.4 Display Information
Description
A display proprietary telephone (PT) can relay the following information to the user while making or receiving
calls:
Conditions
• Display Contrast
The display contrast can be adjusted with the Navigator key or the CONTRAST selector. This is
available only for PTs.
• Ringer Volume
The volume of the ringer can be adjusted with the RINGER Volume selector.
• Self-extension Number
A display PT user can confirm his or her own jack number and extension number on the display.
• Characters (name) or digits (number) exceeding the maximum length of the display are not displayed.
Although in this case information may not be displayed properly, the received information is not altered.
When the information displayed by pressing specific buttons (One-touch Dialling, REDIAL, Save) while
on-hook exceeds 17 characters, the "&" mark will be shown on the right side of the display.
User Manual References
3.1.2 Changing Personal Settings Using Programming Mode
Display Item Display Example Condition
The extension number and name of the
calling or called extension
123: Tom Smith –
The status of the called extension 123: Busy –
The name and number of the doorphone Door Phone 1 –
The telephone number dialled 1234567890 –
The extension number and name of the
calling extension after the call is
forwarded
102:Mike –
The received call information The first line message can be
either (a) or (b) at each extension
through system programming (
Caller ID Log Priority [904]).
a) Caller's name ABC Company
b) Caller's number 12345678
c) Outside (CO) line number Call on CO 1
Duration of the current outside (CO) line
call
CO 1 0:01'15 –
To Next Page
Loading...
