1.10 Conversation Features
Feature Guide 79
1.10.2 Room Monitor
Description
An extension user can monitor a room or a door through another proprietary telephone (PT) or a doorphone
without the destination party knowing.
Conditions
• To monitor using this feature, an extension must have a PT with an AUTO ANS/MUTE button or a single
line telephone (SLT) with a MUTE button. To be monitored using this feature, an extension must have
a PT with an AUTO ANS/MUTE button.
• System programming determines the extensions that can be monitored using this feature ( Room
Monitor [612]).
• A doorphone access tone will be sent to a monitored doorphone before monitoring starts ( 1.15.1
Doorphone Call). If an extension user wants to monitor a doorphone without informing the other party,
it is possible to eliminate the tone through system programming ( Doorphone Access Tone [707]).
• Access tones will not be sent to a monitored PT. Paging tones will also not be received by a monitored
PT.
User Manual References
1.2.4 When the Dialled Party is Busy or There is No Answer
To Next Page
Loading...
