2.3 System Data Control
Feature Guide 181
2.3.6 Country Setting
Description
The country code of the PBX can be selected through system programming ( Country [995]). The PBX
will restart with the default settings of the user's country/area. During this operation, communication
between the PBX and PC will be disconnected one time. Country Setting can also be programmed the first
time the PBX is accessed with a PC using the KX-TE Maintenance Console software (Quick Setup). For
more information about Quick Setup, refer to the Installation Manual ( 3.1.1 Installing KX-TE Maintenance
Console on a PC).
Conditions
• This feature is only available when the suffix of the connected PBX is "NE" or "CE".
To Next Page
Loading...
