Panasonic KX-TEM824 - Hold Recall Time [200]; Transfer Recall Time [201]; Call Forwarding Start Time [202]; Hot Line Waiting Time [203]

3.3 PT Programming
Feature Guide 209
Feature & Programming References
1.10.10 Calling Party Control (CPC) Signal Detection
Hold Recall Time [200]
Feature & Programming References
1.12.1 Call Hold
1.12.2 Call Park
Transfer Recall Time [201]
Feature & Programming References
1.11.1 Call Transfer
Call Forwarding Start Time [202]
Feature & Programming References
1.3.1.2 Call Forwarding (FWD)
Hot Line Waiting Time [203]
Feature & Programming References
1.6.1.7 Hot Line
Call Duration Counter Start [204]
Feature & Programming References
1.5.2.5 Reverse Circuit
1.20.1 Station Message Detail Recording (SMDR)
2 0 0
NEXT SELECT STORE END
(30 s/
1/1.5/2/3/4/5/6 min/
Disable)
2 0 1
NEXT SELECT STORE END
(15/30 s/
1/2 min)
2 0 2
NEXT SELECT STORE END
(5/10/15/
20 s delay)
2 0 3
NEXT SELECT STORE END
(0
…
4 s)
2 0 4
NEXT SELECT STORE END
(5/10/15/20/25/30/35/
40/45/50 s after dialling/
Instantly)